KACO Powador XP500-XP550-HV TL - Manual (Page 97)

Operating Instructions Powador XP500/550-HV-TL Page 97
User interface
9.4.3 Wind speed sensor
Black (bk)
Brown (bn)
GND
Wind speed (0~10V)
bk
bn
1c 1d
UAI
2d 2c
3d 3c
4d 4c
Figure 92: Wind speed sensor Figure 93: Configuration of the wind speed sensor
Terminal number Terminal designation Specification Wire cross- section
3c PTP
0 to 10V
AWG 24
(0.205mm 2 )
3d PTN
4c RSVP
0 to 10V
4d RSVN
Table 30: Connections for analogue user input-Ambient temperature sensor, Wind speed sensor
9.4.4 Parameter settings for analogue sensors
IIn order to determine measured values using the analogue sensors, you have to set the “Options” parameter.
The options are calculated and set by a service technician from KACO new energy Inc.,.
ATTENTION
Be careful not to destroy the sensor's measuring input!
Avoid using voltages > 10 V and make sure that the polarity is correct.