KACO Powador XP500-XP550-HV TL - Manual (Page 41)

Operating Instructions Powador XP500/550-HV-TL Page 41
Storage/Installation/Start-up
Network
Network
Config
IP
Netmask
Gateway
Web Port
Static
192.168.10.11
255.255.255.0
192.168.10.1
82
Set
Set
Set
Set
Set
Figure 36: “Network” screen
Configure the network for the MMI
" Select static and dynamic IP addresses via DHCP service requests.
" Change the web port used for monitoring the inverter via the web.
" Open the web monitoring service using the MMI`s IP address and web port (e.g. http://192.168.10.11:82).
Software upgrade
If an update is available (for example, when new functions are added), use the SD card to update the inverter
software.
SAFE
NOTE
Do not remove the SD card until the SAFE icon is displayed so that it will be detected by the
MMI when you reinsert it.