KACO Powador XP500-XP550-HV TL - Manual (Page 70)

Page 70 Operating Instructions Powador XP500/550-HV-TL
Parameters
8.4 Time Parameters
Parameters Min Max Descriptions
Year 2000 3000 The present year
Month 1 12 The present month
Day 1 31 The present date
Time 0 23 The present hour
Minute 0 59 The present minute
Second 0 59 The present second
Table 16: Time Parameters
8.5 Digital Parameters
Parameters Min Max Unit Descriptions
DI1 Select 0 20 N/A DI1(Digital Input) selection
0: Disable DI1
1: Reserved
2: Reserved
3: Start/Stop operation of the inverter by DI1
(Recognition pattern: 1sec – Stop, 2sec – Start)
4: Start/Stop operation of the inverter by DI1
(Recognition pattern: 200msec – Stop, 400msec
– Start)
5: Stop operation of the inverter by DI1
(Inverter turn off when DI1 signal over {DI1 Check
Period} msec)
DO1 Select 0 20 N/A DO1(Digital output) selection
0: Fault state is output to DO1
RPC Mode Select 0 2 N/A The COSPHI control function of the XP-Series
Inverter operates when this parameter is 2.
0: Disable
2: Enable
Power Meter 0 99999999 kWh PV generation amount check
RS485 Protocol 0 999 - RS485 communications’ protocol
0: ACI protocol
1: Communication with prolog
2: Communication with PVI-go
RS485 ID 0 999 - ID for RS485 communication
CAN ID 0 999 - ID for CAN communication
Table 17: Digital Parameters