KACO Powador XP500-XP550-HV TL - Manual (Page 42)

Page 42 Operating Instructions Powador XP500/550-HV-TL
Storage/Installation/Start-up
Updating the software for the MMI
SAFE
NOTE
Do not remove the SD card until the SAFE icon is displayed so that it will be detected by the
MMI when you reinsert it.
Update the MMI software
Perform the following steps in the indicated sequence:
" Copy the software image file (*.img) to the SD card.
" Insert the SD card into the MMI.
" Select “Setup” → “Software upgrade”.
" Select “MMI” and press “Start”.
" A dialog box is then displayed.
" Confirm the message to indicate that you understand that this process cannot be undone.
A dialog box for opening files is then displayed.
" Select the image file that you copied earlier.
" Press the “Open” button.
The MMI displays the progress of the upgrade. After a short period of time, the system is restarted.
NOTE
If the image file is faulty, an error message is displayed and normal operation is resumed.
Software upgrade
C6x
MMI
Start
MMI
/mnt/sdcard Search in:
mmi_v107.img
mmi_v107.img
*.img
File name:
File type:
Open
Cancel
Figure 37: Software upgrade screen Figure 38: Dialog box for opening files