6 connecting the external voltage supply – KACO Powador XP500-XP550-HV TL User Manual
Page 25
Operating Instructions Powador XP500/550-HV-TL
Page 25
Storage/Installation/Start-up
5.4.6 Connecting the external voltage supply
The external voltage supply supplies the MMI, fans, measurement equipment, etc.
Connect the external voltage supply
The connection for the additional power supply is located in the left side of the inverter housing.
"
Connect the additional power supply to the terminals marked “TO” using single-phase 230V.
1
2
Figure 13: Connecting the external voltage supply
Key
1
User interface
2
TO (connection for auxiliary power supply) 230VL, 230VN (Max. Cable diameter - 2.5mm
2
)