KACO Powador XP500-XP550-HV TL - Manual (Page 54)

Page 54 Operating Instructions Powador XP500/550-HV-TL
Faults and Warnings
Code Message Warning Description Possible problem and Solution(s)
41 Flash Memory
Failure C6000 DSP program flash
memory failure in XCU(main
control) board Possible problem
• Internal C6000 error
Solution(s)
• Change the PCB module
42 FPGA Failure FPGA failure in XCU(main
control) board Possible problem
• Internal FPGA error
Solution(s)
• Change the PCB module
43 DSP28x Failure F2000 DSP failure in XCU(main
control) board Possible problem
• Internal F2000 error
Solution(s)
• Change the PCB module
44 ADC Failure ADC block failure in XCU(main
control) board Possible problem
• Internal Analog to Digital converter
error
Solution(s)
• Change the PCB module
45 NVSRAM Failure NVSRAM failure in XCU(main
control) board or invalid param-
eter Possible problem
• Internal NVSRAM error
• Invalid parameter
Solution(s)
• Initialize the parameter menu setting in
the GUI
• Change the PCB module
47 CAN Failure CAN bus communication failure Possible problem
• CAN bus communication Failure
Solution(s)
• Check the CAN bus Connection
• Check the CAN bus terminal registers
50 Emergency Stop The door is open Possible problem
• Front door is open
• Broken or out of alignment door switch
Solution(s)
• Close the door
• Align or replace door switch
Table 10: Fault