KACO Powador XP500-XP550-HV TL - Manual (Page 31)

Operating Instructions Powador XP500/550-HV-TL Page 31
Storage/Installation/Start-up
5.7 User interface
The MMI has a graphic interface which you use to monitor and control the inverter. The MMI has the follow-
ing functional features:
• The LCD screen displays the operating states, along with voltages, currents, frequencies, temperatures, out-
put powers, status of errors/warning messages, and events. Pressing the MMI touch screen switches on the
LCD backlight. If the display is not activated within five minutes, the LCD backlight switches automatically off.
• Touch screen for navigating through the menus SD card: the MMI continually records data to the SD card.
When recording once every 10 minutes (around the clock), the maximum amount of data per year is 360KB.
When the SD card is full, the oldest data is overwritten.
• Configuration of country-specific settings (power grid standard, maximum/minimum voltage/frequency)
• Ethernet interface for monitoring and service, network connection for remote use
• RS485 interface for logging and transferring data
• USB interface for connecting external units (e.g. laptop computer)
2
3
1
4
5
6
7
8
Figure 17: Front of the MMI Figure 18: Rear of the MMI
Key
1 Protective cover 5 Ethernet interface
2 MMI touch screen, LCD 6 RS232 interface (internal interface)
3 USB interface 7 RS485 interface
4 Power connection 8 SD card