KACO Powador XP500-XP550-HV TL User Manual
Page 27
Operating Instructions Powador XP500/550-HV-TL
Page 27
Storage/Installation/Start-up
2
1, 3
Figure 14: Cabinet (interior view)
Key
1
Fuse F30, 31, 34, 35
Circuit breakers CB32, 38, 39, 40
2
Circuit breakers MCB20, 21
3
Circuit breakers CB33 or CB37
When voltage is present at the inverter, it can be started up. Use the MMI interface screen (located in the left
side of the housing) to start up the inverter.
The inverter begins operation in a specified sequence. For more information, see section 5.2 (“Transporting
the unit to the installation location”)
If a fault occurs, the inverter cannot begin operation. For more information on faults, see section 6 (“Faults
and Warnings”).
Start up the inverter
Display
Check
Action
Error message on the MMI screen
NO
"
Select the ON button
YES
"
Reset using “Fault reset"
"
Select the ON button
NOTE
If the fault cannot be reset using “Fault reset”, please contact our service depart-
ment.