Yaskawa YASNAC PC NC PLC Programming Manual - Manual (Page 181)

8 - 33
YASNAC PCNC PLC Programming Manual Chapter 8: Online Editing
ø After the completion of the check indicated above, the screen changes.
During net check, the NET CHECKING” is displayed on the screen as shown
in Fig. 8.19.
Fig. 8.19 Screen during Net Check
(2) Forced stop of net check.
If the power is turned OFF during net check, the information might not be updated entirely.
Therefore, the sequence is automatically initialized (booting from flash ROM to CMOS)
when the poser is turned ON next.
Edit the sequence again.