Yaskawa YASNAC PC NC PLC Programming Manual - Manual (Page 175)

8 - 27
YASNAC PCNC PLC Programming Manual Chapter 8: Online Editing
(b) Resisters that can be input
The registers that can be input in the operand input pop-up box for the individual
register instructions are indicated in Table 8.5.
If a register outside the allowable range is input, the following warning message is
displayed.
“INPUT ERROR!”
Table 8.4.5.2 Range of Registers that can be input for Individual Register instructions
(c) Input range
With each register instruction, the input range is determined for individual operands.
If a value outside the allowable range is input, the following warning message is
displayed.
“INPUT ERROR!”
The ranges of registers and reals that can be input for individual registers are indicated
in Table 8.6.
Resister Instruction Input Permitted Registers Range Group
TIM
TMR #1300 to #1399, #1700 to #1799
#1300 to #1399, #1700 to #1799
A
TPSH N9000 to N9323 B
Other instructions #1000 to #1063, #1100 to #1163, #1200 to #1299
#1400 to #2999, #3000 to #3159, #3500 to #3699
C