Yaskawa YASNAC PC NC PLC Programming Manual - Manual (Page 177)

8 - 29
YASNAC PCNC PLC Programming Manual Chapter 8: Online Editing
(d) Operand input procedure (decimal, hexadecimal)
In the operand input pop-up box, a real can be input in either decimal or hexadecimal.
If “H” is entered after entering a real, it is regarded as a hexadecimal number.
Examples: 64H_ Regarded as “100”.
64_ Regarded as “64”.
(5) Moving the Cursor on the Register and SUBP Instructions
There are cases in which the cursor movement is not allowed when the register or SUBP
instruction is on the edit screen.
The cursor movement on the register or SUBP instruction is executed in the following
manner.
Table 8.7 Cursor Movement on the Register or SUBP instructions