Yaskawa YASNAC PC NC PLC Programming Manual - Manual (Page 160)

8 - 12
YASNAC PCNC PLC Programming Manual Chapter 8: Online Editing
8.4.1 Edit Mode
When selecting an edit item, either a net edit key or an action key on the NC operation panel
can be used.
(1) Selecting the Edit Mode by [ NET EDT ] Key
Select the net edit mode from the menu items in the pop-up menu.
Net edit items:
CHG (change): This mode is used to change the net.
INS (insert): This mode is used to insert a net.
DEL (delete): This mode is used to delete an existing net.
(2) Selecting the Edit Mode by Action Key on the NC Operation Panel
Selection of an edit mode is possible without displaying the pop-up menu screen. To clear
the pop-up from the screen, press the [
NET EDT ] function soft-key once again.
Without using the pop-up menu, change, insert, and delete modes can be selected by using
the action keys on the NC operation panel.
[ ALT ] key: This selects the change mode.
[ INS ] key: This selects the insert mode.
[ ERASE ] key: This selects the delete mode.