SMA WEBBOX-BT-20 - Manual (Page 73)

SMA Solar Technology AG Service Functions
User Manual SWebBox20-BA-en-13 73
• Press the concealed Reset button inside the hole using
a pointed object.
☑ The Sunny WebBox is reset.
9.5 Determining Current Network Settings of the Sunny WebBox
Using the SD Card
The following steps can be used to determine the current settings and the current firmware of the
Sunny WebBox if you cannot access the user interface.
Please observe the information on the SD card (see Section 11.1 ”Information on the SD Card”
(page 81)).
1. Insert the SD card into the SD card slot of the Sunny WebBox.
☑ The Sunny WebBox creates a directory with the name "WEBBOX_[Serial number]" on the
SD card and uses it to store the XML file "config.xml". The writing process is complete when
the "SD CARD" LED glows continuously.
Example: \WEBBOX_0155000123\config.xml
2. If the "SD CARD" LED glows continuously, remove the SD card from the SD card slot of the
Sunny WebBox.
3. Read out the SD card using a computer with an SD card reader.
4. In the WebBox_[Serial number] directory, open the "config.xml" file with a text editor or an
Internet browser.
☑ Read off the network settings of the Sunny WebBox (see Section 11.2 ”Structure of the
Config.xml File” (page 81)).