SMA WEBBOX-BT-20 - Manual (Page 68)

Service Functions SMA Solar Technology AG
68 SWebBox20-BA-en-13 User Manual
Update status
The relevant update statuses for the whole PV plant, the individual devices and the update files are
shown on the Sunny WebBox user interface.
Reading off the update status of the PV plant
1. Log into the Sunny WebBox.
2. Select the Sunny WebBox in the plant tree.
3. Select "Overview" in the device menu.
or
Select the "Plant Communication" > "Device update" parameter group in the "Spot Values"
device menu.
If the update status "Information" or "Warning" appears, this is also displayed in the status bar.
Update status of the device
• To read off the update status of the individual devices, select "Name of your plant" in the plant
tree and select the "Updates" tab (see Section 4.1.8 ”Updates” (page 28)).
Status of the update file
• To read off the status of the update file, select "Name of your plant" in the plant tree and select
the "Updates" tab (see Section 4.1.8 ”Updates” (page 28)).
Symbol Update status Meaning
OK No update files are available, or the update function is not
activated.
Information "There is information on the device update"
Warning "There are warnings regarding the device update"
Update status Meaning
"OK" No update files are available for this device, or the update
function is not activated.
"Update available" The update file is ready for sending to the devices in the PV plant.
"Update in process" The update process is underway.
"Update failed" The update process was unsuccessful. The update file was not sent
to all devices in the PV plant.
Status Meaning
"Download available" The update file is available for downloading.
"Ready" The update file was downloaded and can be sent to the devices
in the PV plant.
"Sending" The update file is being sent to the devices in the PV plant. This can
take approx. 20 minutes.
"Waiting" The update file is in the queue and will be sent to the devices in the
PV plant as soon as possible.