SMA WEBBOX-BT-20 - Manual (Page 54)

Configuring the Sunny WebBox SMA Solar Technology AG
54 SWebBox20-BA-en-13 User Manual
7.7.2 Activating E-mail Alert in the Event of a Fault
1. Log into the Sunny WebBox as an installer.
2. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
3. Select the "External Communication > SMTP" parameter group.
4. Select [Edit].
5. Enter data of the e-mail server (SMTP):
– Enter the user name in the "Login" field.
– If the SMTP server requests specification of an e-mail sender address, enter the desired
e-mail sender address in the "Alternative e-mail sender address (optional)" field.
– In the "Port" field, enter the port of the SMTP server.
– In the "Password" field and the "Confirm the password" field, enter the password of the user
account.
– In the "Server" field, enter the name of the SMTP server (e.g. mail.gmx.net).
6. Select [Save].
☑ The e-mail server (SMTP) is set up.
7. Select the "Further Applications > Alarm" parameter group.
8. Select [Edit].
9. In the "Email" area, select "Yes" in the "Activated" field.
10. In the "Email address(es)" field, enter recipient's e-mail address. Multiple e-mail addresses should
be separated by a comma or a semicolon.
11. Make a selection in the "Alarm upon warnings" field in the "Filter settings" area:
– If you would exclusively like to be informed of events of the type "Fault", select "No".
– If you would like to be informed of events of the type "Fault" and events of the type
"Warning", select "Yes".
12. Select [Save].
☑ E-mail alert in the event of a fault is activated.
13. To test the dispatch, send a test e-mail. To do so, select [Execute] in the "Send test e-mail" field.
☑ The Sunny WebBox sends a test e-mail to the specified e-mail address(es).
7.7.3 Deactivating E-mail Alert in the Event of a Fault
1. Log into the Sunny WebBox as an installer.
2. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
3. Select the "Further Applications > Alarm" parameter group.
4. Select [Edit].
5. Select "No" in the "Activated" field.