SMA WEBBOX-BT-20 - Manual (Page 11)

SMA Solar Technology AG Safety
User Manual SWebBox20-BA-en-13 11
2.1.1 Supported Products
The Sunny WebBox supports the following SMA products:
• all SMA inverters with integrated Bluetooth
• SMA inverters with upgraded SMA Bluetooth Piggy-Back/SMA Bluetooth Piggy-Back Plus
from firmware version 02.00.00.R. A list of the supported inverters can be found in the
SMA Bluetooth Piggy-Back/SMA Bluetooth Piggy-Back Plus manual.
• Sunny Backup with upgraded SMA Bluetooth Piggy-Back Off-Grid from firmware
version 01.00.00.R. A list of the supported Sunny Backups can be found in the
SMA Bluetooth Piggy-Back Off-Grid manual.
• Power Reducer Box
• Sunny Matrix from firmware version 2.10.00
• SMA Bluetooth Repeater
• Sunny SensorBox with SMA Power Injector with Bluetooth
• SMA radio-controlled socket
2.1.2 Target Group
This document is intended for end users and skilled persons. When you log into the Sunny WebBox
there are two user groups at your disposal: "Installer" and "User". The "Installer" user group may only
be used by qualified personnel who are authorised to make changes to network parameters for the
connected devices.
2.1.3 System Requirements
Recommended screen resolution:
• 1,024 x 768 pixels
Internet browser:
• Internet Explorer from version 8
• Firefox from version 3.6
Inverters of the type SB x000TL-20 are only supported from firmware
version 2.06 onwards
• For those inverters with a firmware version lower than 2.06, perform a firmware
update using an SD card (see technical description "Firmware Update with SD Card"
at www.SMA-Solar.com).
Updating the firmware of SMA products
To ensure that Bluetooth communication functions correctly in the plant, the firmware of the
SMA products must be up to date.
• Before commissioning the Sunny WebBox, update the firmware of the SMA products
(see manual of the SMA products).