SMA WEBBOX-BT-20 User Manual
Page 48

Configuring the Sunny WebBox
SMA Solar Technology AG
48
SWebBox20-BA-en-13
User Manual
1. Log into the Sunny WebBox.
2. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
3. Select the "External Communication > DHCP" parameter group.
4. Select [Edit].
5. Select "Yes" in the "Activated" field.
6. Select [Save].
☑ DHCP is activated in the Sunny WebBox. You can access the user interface via the URL
http://WebBox"serial number" (see Section 5.1 ”Logging into the Sunny WebBox”
(page 35)).
7.5.3 Configuring Static Network Settings (Deactivating DHCP)
1. Log into the Sunny WebBox.
2. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
3. Select the "External Communication > Ethernet" parameter group.
4. Select [Edit].
5. In the "DNS server IP" field, enter the IP address of the DNS server (Domain Name System
server). Usually, the IP address of the router has to be entered here.
6. In the "Gateway IP" field, enter the IP address of your network's gateway. Usually, the IP
address of the router has to be entered here.
7. In the "IP Address" field, enter the static IP address at which the Sunny WebBox is to be accessed
in the local network (see Section 11.7 ”Assigning IP Addresses in a Local Network” (page 85)).
8. Enter the subnet mask of your network in the "Subnet mask" field. Normally, you can find this
information in the router manual.
9. In the "DHCP" parameter group, select "No" in the "Activated" field.
10. Select [Save].
☑ The network settings are assigned manually. You can access the user interface via the static
IP address (see Section 5.1 ”Logging into the Sunny WebBox” (page 35)).