HEIDENHAIN TNC 320 (34055x-06) Cycle programming - Manual (Page 224)

Cycles: Coordinate Transformations
11.3 DATUM SHIFT with datum tables (Cycle 7, DIN/ISO: G53)
11
224
TNC 320 | User's Manual Cycle Programming | 5/2013
Editing the datum table in the Programming and
Editing mode of operation
After you have changed a value in a datum table, you
must save the change with the ENT key. Otherwise
the change might not be included during program
run.
Select the datum table in the
Programming and Editing mode of
operation
Call the file manager: Press the PGM MGT key
Display the datum tables: Press the SELECT TYPE
and SHOW .D soft keys
Select the desired table or enter a new file name.
Edit the file. The soft-key row comprises the
following functions for editing:
Function Soft key
Select beginning of table
Select end of table
Go to the previous page
Go to next page
Insert line (only possible at the end of table)
Delete line
Find
Go to beginning of line
Go to end of line
Copy the current value
Insert the copied value
Add the entered number of lines (datums) to the
end of the table