HEIDENHAIN TNC 360 User Manual - Manual (Page 68)

4-3 TNC 360
4 Programming
or
or
4.1 Editing Part Programs
Editing functions
Editing means entering, adding to or changing commands for the TNC.
The TNC enables you to
• Enter data with the keyboard
• Select desired blocks and words
• Insert and erase blocks and words
• Correct erroneously entered values and commands
• Easily clear TNC messages from the screen
Types of input
Numbers, coordinate axes and radius compensation are entered directly
by keyboard. You can set the algebraic sign either before, during or after a
numerical entry.
Selecting blocks and words
• To call a block with a certain block number:
The entered block is shown between two horizontal lines.
• To move one block forward or backward:
Press the vertical cursor keys.
• To select individual words in a block:
Press the horizontal cursor keys.
• To find the same word in other blocks:
Select the word in the block.
Jump to the same word in other blocks.
or
or
1 e.g.
GOTO 0
ENT