HEIDENHAIN TNC 360 User Manual - Manual (Page 40)

TNC 360 2-2
2 Manual Operation and Setup
together
e.g. X
e.g.
Y I
2.1 Moving the Machine Axes
Traversing with the machine axis direction buttons:
MANUAL OPERATION
Press the machine axis direction button and hold it for as long as you wish
the axis to move.
You can move several axes at once in this way.
For continuing movement:
MANUAL OPERATION
Press and hold the machine axis direction button, then press the machine
start button. The axis continues to move after you release the key.
To stop the axis, press the machine STOP button.
You can only move one axis at a time with this method.