HEIDENHAIN TNC 360 User Manual - Manual (Page 61)

TNC 360 3-2
3 Test Run and Program Run
NO
ENT
e.g. 1 0
ENT
STOP
NO
ENT
3.1 Test Run
In the TEST RUN mode of operation the TNC checks programs and
program sections for the following errors without moving the machine
axes:
• Geometrical incompatibility
• Missing data
• Impossible jumps
The following TNC functions can be used in the TEST RUN operating
mode:
• Test interruption at any block
• Optional block skip
To do a test run:
TEST RUN
TO BLOCK NUMBER =
Test the entire program.
Test the program up to the entered block.
Test run functions
Function Key
• Interrupt the test run
• Continue test run after interruption