HEIDENHAIN TNC 360 User Manual - Manual (Page 5)

TNC 360
How to use this manual
This manual describes functions and features available on the TNC 360
from NC software number 259 900 11.
This manual describes all available TNC functions. However, since the
machine builder has modified (with machine parameters) the available
range of TNC functions to interface the control to his specific machine,
this manual may describe some functions which are not available on your
TNC.
TNC functions which are not available on every machine are, for example:
• Probing functions for the 3D touch probe system
• Digitizing
• Rigid tapping
If in doubt, please contact the machine tool builder.
TNC programming courses are offered by many machine tool builders as
well as by HEIDENHAIN. We recommend these courses as an effective
way of improving your programming skill and sharing information and
ideas with other TNC users.