HEIDENHAIN TNC 360 User Manual - Manual (Page 208)

11-3 TNC 360
11 MOD Functions
11.3 Entering the Code Number
The TNC asks for a code number before allowing access to certain
functions:
Function Code number
Cancel erase/edit protection (status P) 86357
Select user parameters 123
Timers for:
Control ON
Program run
Spindle ON
857282
Code numbers are entered in the dialog field after the corresponding MOD
function is selected.
11.4 Setting the External Data Interfaces
Two functions are available for setting the external data interface:
• BAUD RATE
• RS-232 INTERFACE
Use the vertical arrow keys to select the functions.
BAUD RATE
The baud rate is the speed of data transfer in bits per second.
Permissible baud rates (enter with the numerical keys):
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 baud
The ME 101 has a baud rate of 2400.
RS-232-C Interface
The proper setting depends on the connected device.
Use the ENT key to select the baud rate.
External device RS-232-C interface =
HEIDENHAIN FE 401 and FE 401B
floppy disk units
FE
HEIDENHAIN ME 101 magnetic tape
unit (no longer in production)
ME
Non-HEIDENHAIN units such as printers,
tape punchers, and PCs without TNC.EXE
EXT
No transfer of data – empty –