HEIDENHAIN TNC 360 User Manual - Manual (Page 42)

TNC 360 2-4
2 Manual Operation and Setup
2.1 Moving the Machine Axes
X e.g.
e.g. 8
ENT
Fig. 2.3: Incremental jog positioning in the
X axis
Z
X
8 8
8 16
Incremental jog positioning
With incremental jog positioning, a machine axis will move by a prese
increment each time you press the corresponding machine axis
direction button.
ELECTRONIC HANDWHEEL
INTERPOLATION FACTOR: 4
Select incremental jog positioning.
Select incremental jog positioning by pressing the handwheel mode
key again.
ELECTRONIC HANDWHEEL
JOG-INCREMENT: 4 8
Enter the jog increment (here 8 mm).
Press the machine axis direction button as often as desired.
Incremental jog positioning must be enabled by the machine tool manufacturer.
Positioning with manual data input (MDI)
Page 5-40 describes positioning by manually entering the target coordi-
nates for the tool.