HEIDENHAIN TNC 360 User Manual - Manual (Page 229)

12-19 TNC 360
12 Tables, Overviews, Diagrams
12.5 Features, Specifications and Accessories
Programmable Functions
Contour elements
Straight line, chamfer, circle center, circle radius, tangentially connecting
arc, corner rounding.
Program jumps
Subprogram, program section repetition, main program as subprogram.
Fixed cycles
Peck drilling, tapping (also with synchronized spindle), rectangular and
circular pocket milling, slot milling, milling pockets and islands from a list
of subcontour elements.
Coordinate transformations
Datum shift, mirroring, rotation, scaling factor.
3D Touch Probe System
Probing functions for measuring and datum setting, digitizing 3D surfaces
(optional).
Mathematical functions
Basic operations +, –, x and %, trigonometric functions
sin, cos, tan and arctan.
Square roots ( a ) and root sum of squares ( a
2 + b 2 ).
Logical comparisons greater than, smaller than, equal to, not equal to.
TNC Specifications
Block execution time 1500 blocks/min (40 ms per block)
Control loop cycle time 6 ms
Data transfer rate Max. 38 400 baud
Ambient temperature 0°C to 45°C (operation)
–30°C to 70°C (storage)
Traverse Max. ± 30 m (1181 inches)
Traversing speed Max. 30 m/min (1181 ipm)
Spindle speed Max. 99 999 rpm
Input resolution As fine as 1 µm (0.0001 in.) or 0.001°