HEIDENHAIN TNC 360 User Manual - Manual (Page 212)

TNC 360 12-2
12 Tables, Overviews, Diagrams
12.1 General User Parameters
General user parameters are machine parameters which affect the
behavior of the TNC. These parameters set such things as:
• Dialog language
• Interface behavior
• Traversing speeds
• Machining sequence
• Effect of the overrides
Selecting the general user parameters
General user parameters are selected with code number 123 in the MOD
functions.
The MOD functions also include machine-specific user parameters.
Parameters for external data transfer
These parameters define control characters for blockwise transfer.
Input values: Number between 0 and 32 382
(ASCII character with 16-bit coding)
Note:
The character defined here for end of program is also valid for the setting
of the standard interface.
MP 5010
Function M P Bit
• End of program 5010.0 .................................................................................. 0 to 7
• Beginning of program 5010.0 .................................................................................. 8 to 15
• Data input 5010.1 .................................................................................. 0 to 15
• Data output 5010.2 .................................................................................. 0 to 15
• Beginning of command block 5010.3 .................................................................................. 0 to 7
• End of command block 5010.3 .................................................................................. 8 to 15
• Positive acknowledgment 5010.4 .................................................................................. 0 to 7
• Negative acknowledgment 5010.4 .................................................................................. 8 to 15
• End of data transfer 5010.5 .................................................................................. 0 to 15