Grass Valley Xbuilder Vertigo Suite v.4.8 - Manual (Page 23)

Xbuilder User Manual 2-11
Getting started with Xbuilder
e. Click A PPLY .
The device is added to the Device list in the Device Configuration dialog box.
3. In the D EVICE C ONFIGURATION dialog box, select the text box to the right of D EVICE 1.
4. Select the device name from the table and click .
The device appears in the box on the right side with its name in the D EVICE 1 field.
5. Click C LOSE on the Device Configuration dialog box.
6. Restart Xbuilder and ensure that the device was added to the D EVICE FOR V ERIFY drop-
down list in the upper-right corner of Xbuilder’s Playlist Editor toolbar.
External Keyer Allows you to associate another device with the current device. This setting is
specifically used when the CG output is keyed over the ImageStore output. In this
way, specific commands can be sent to the ImageStore (the External keyer) when
specific things are done on the CG.
Publish Master Lets you select a master device.