Grass Valley Xbuilder Vertigo Suite v.4.8 - Manual (Page 147)

Xbuilder User Manual 9-15
Appendix B - Quick reference to Xbuilder’s settings
Servers settings
The Servers settings specify the locations of the Xmedia Server and the Data Server. The
XmediaServer contains all assets, i.e. all building blocks used in the creation of broadcast
graphics. This is where playlists, templates, images, etc., are stored. The Data Server is an
application that manages all data coming in from sources specified in templates. The Data
Server distributes the data and provides live updates of data values when requested.
Figure 9-12. Servers Settings dialog box
• XmediaServer IP Address - Specifies the IP address of the machine running the
XmediaServer.
• XmediaServer Port - Specifies the port on which the XmediaServer is listening.
• Backup XMedia Server IP Address - Specifies the backup server’s IP address used
in case of failure of the primary Xmedia Server.
• Backup XMedia Server Port - Specifies the backup server’s port used in case of
failure of the primary Xmedia Server.
• Data Server IP Address - Specifies the IP address of the Data Server.
• Data Server Port - Specifies the port on which the Data Server is listening.
• Backup Data Server IP Address - Specifies the backup data server’s IP address used
in case of failure of the primary data server.
• Backup Data Server Port - Specifies the backup data server’s port used in case of
failure of the primary data server.
N OTE
To access the Xmedia Server and Data Server interfaces, select S TART >S ETTINGS >C ONTROL P ANEL .
Then select the V ERTIGO X MEDIA D ATA S ERVER or V ERTIGO X MEDIA X MEDIA S ERVER icons.