Correcting common ethernet network problems – Grass Valley Profile XP Service Manual User Manual
Page 78

Chapter 8 Troubleshooting miscellaneous system problems
78
Profile XP Service Manual
23 July 2004
Correcting common Ethernet network problems
This troubleshooting aid provides corrective action for some common Ethernet
network problems.
No display
Component failure in
Applications Processor board
Replace Applications Processor
board.
Monitor or cable failure
Replace cable or monitor as
necessary.
Problem
Possible Causes
Corrective Action
Windows NT reports there is an
IP address conflict.
Two or more Profile XP systems
have the same Ethernet IP
address.
Refer to the procedure Set
machine name and IP address
on each Profile XP system in the
Profile XP System Guide.
Only the local Profile XP
system is listed in Network
Neighborhood.
Missing network connection.
Check that the link indicator
LED is lit on the hub you’re
using. If not, make sure the
network cable is properly
connected.
No Profile XP systems are listed
in the network neighborhood.
Some component of Windows
NT Networking improperly
installed.
Refer to the Windows NT
documentation that came with
your Profile XP Media
Platform.
Profile XP systems do not
immediately appear in Network
Neighborhood, but are
eventually displayed.
This is the normal operation of
Network Neighborhood.They
same applies when systems are
switched off. It may be several
minutes before refreshing the
display removes the system
from the list.
None
Symptom
Possible Causes
Solution