Grass Valley Profile XP Service Manual - Manual (Page 130)

Appendix A Diagnostic Tools
130 Profile XP Service Manual 23 July 2004
To set storage time remaining estimate perimeters:
1. Select the Storage tab in the Properties window.
2. Click Settings .
3. The storage time remaining estimate is based on the values that you enter in the
Disk Capacity setting as shown below.
Select the compression method and data rate being used by the media platform to
allow NetCentral to accurately estimate the remaining storage capacity in the
RAID storage subsystem.
4. Use the slider to set the “storage capacity used” threshold used to trigger a disk
capacity warning message, then click Apply .