Grass Valley Profile XP Service Manual - Manual (Page 138)

Appendix A Diagnostic Tools
138 Profile XP Service Manual 23 July 2004
7. When you are satisfied with your settings, click the OK button to put the settings
into effect and close the dialog box.
Configuring actions and notifications
You can configure NetCentral Lite to trigger one or more actions whenever it receives
an alarm or warning message. For each action that is triggered, you can also set unique
properties. In this way you can trigger the same type of action multiple times, but set
the properties differently for each action. This is useful for multiple notifications, such
as sending e-mail to several different addresses. By configuring actions and properties
in this way you can create a customized set of notifications for alarms and another
customized set for warnings.
Adding and modifying actions
This section documents NetCentral II Lite. For NetCentral III Lite click Help | Help
Topics to view similar documentation.
All actions and properties are configured from the Actions dialog box or the Actions
Wizard. Since the properties are different for each type of action, they may require
some special preparations, such as procuring a sound file or a program. Read the
explanation for each type of action to determine if you need to do some preparations
before you can add a particular action.
To add an action
1. Choose Configure | Actions or Actions | Set Actions . The Actions dialog box or the
Actions Wizard opens. Follow the on-screen instructions to add an action, as
follows for the Actions dialog box.
2. As indicated by the interface text, create a rule for this action by selecting Alarm,
Warning, or both. Then, in the Action list, select the type of action that you want
performed.