Grass Valley Profile XP Service Manual - Manual (Page 63)

Using the PFR 500/600 Series device provider interface
23 July 2004 Profile XP Service Manual 63
2. Select a subsystem for the RAID Controller to open the device provider interface
and check sub-system status.
3. You can browse each RAID chassis subsystem in the same way. Alarm and
Warning messages are also displayed in the NetCentral interface.
For more information about using the NetCentral interface, refer to the appropriate
documentation for your NetCentral product. If you are using NetCentral Lite, refer to
“Using NetCentral Lite” on page 122. If you are using NetCentral, refer to the
NetCentral User Guide.
CAUTION: Do not use the PFR Series device configuration application
(Web Manager on PFR500 and PFR600 for example). This utility is not
supported. Use the GVG Disk Utility as described in the Profile XP System
Guide to make all RAID configuration changes.
!