Grass Valley Profile XP Service Manual - Manual (Page 61)

Locating a drive or a chassis
23 July 2004 Profile XP Service Manual 61
Locating a drive or a chassis
When trying to locate a drive or a chassis named in a NetCentral message, refer to
your Installation Guide and Profile XP System Guide for cabling and configuration
information. The key to locating any RAID component is to remember that the RAID
controller board in the RAID chassis has the unique number.
The link control module in
chassis Y associated with RAID
controller X has failed. Restart the RAID system and the
Profile if using local storage. In
Open SANs, consult the Open
SAN Instruction Manual, or
contact Support.
RAID storage messages Possible cause Corrective action