Grass Valley Profile XP Service Manual - Manual (Page 112)

Chapter 11 Parts removal and replacement
112 Profile XP Service Manual 23 July 2004
19. When the Master Drive Configuration box appears, perform one of the following
steps:
- If the PRIMARY drive was replaced, highlight Rebuild drive on
Primary Channel , then press Enter .
- If the MIRROR drive was replaced, highlight Rebuild drive on the
Mirror Channel , then press Enter .
The Copy Drive dialog box appears displaying drive copy status and estimated
completion time. Primary and Mirror drive LEDs appear orange while the Master
LED flashes red.
20. When the status message appears indicating the drives are identical, remove the
DupliDisk2 DUPLI Mirroring Utility diskette.
21. Exit the DupliDisk2 DUPLI Mirroring Utility and reboot as follows:
a. Use the arrow keys to select the Exit, then press Enter .
b. In the confirmation dialog box that appears type Y (to select Yes), then press
Enter .
c. Press Enter again to continue, which reboots the system from the Primary system
drive to start Windows NT.