Grass Valley Kayak HD Installation v.6.8.8 - Manual (Page 94)

94 Kayak HD — Installation and Service Manual
Section 3 — Configuration
Note If you reboot the Kayak frame, it will reset the Gateway address to its previous
setting. To reset the Gateway address permanently (so that it will remain after
a reboot) please contact Grass Valley Group support (see Contacting Grass
Valley
on page 4 ).
Software Installation
Kayak system software updates are distributed on a Kayak Software
Release CD-ROM, or can be downloaded from the Thomson Grass Valley
web site.
Software Versions
The currently loaded software versions of the Kayak system devices is
shown on the Device Control menu, accessed via
Home – Install – System –
Device Control ( Figure 54 ).
Figure 54. Device Control Menu
The Device Control menu shows on the left all the network connected
devices (Kayak-MF = Mainframe, Kayak-CP = Control Panel) with IP
address and software version installed.
On the right details of the selected device are listed.