Grass Valley Kayak HD Installation v.6.8.8 - Manual (Page 160)

160 Kayak HD — Installation and Service Manual
Section 4 — Maintenance
Figure 108. Kayak HD Frame Controller Board with Battery in center of board
Figure 109. Kayak HD Frame Controller Board Battery
3. Remove the old battery by lifting the clip holding it in place.
4. Put the new battery in place and secure the clip.
5. Re-insert the frame controller board and close the frame door.
6. Check the frame BIOS after replacing the frame battery using the
procedure described in Frame BIOS Settings
on page 163 .
KHD_F
reameCo
n
tr
olle
rBoa
rd
r1
KHD_F
rameBatte
ryCU