Open a telnet connection – Grass Valley Kayak HD Installation v.6.8.8 User Manual
Page 91
Kayak HD — Installation and Service Manual
91
Setting Up IP Addresses
Open a Telnet Connection
To set up a Telnet connection for your Kayak HD switcher:
1.
Connect a computer terminal to the Kayak frame using a pass-through
male-to-female serial cable (do not use a null modem cable) connecting
the DB9 connector on the front of the Kayak frame chassis to the
communications port on the back of the computer.
2.
Open a terminal emulator software application (such as HyperTerminal
or Windows command tool).
a.
From the Microsoft Windows interface click the
Start
button and
select the
Run
option. The
Run
window displays.
b.
In the
Open:
text window type cmd and click
OK
. The command tool
window displays.
3.
Telnet into the Kayak Frame in the WindRiver VxWorks operating
system by typing in:
telnet IPAddress_of_Kayak_Frame
Example
: telnet 10.16.20.71
The VXWorks login: prompt displays
Type in:
Your computer should now be connected to the Kayak frame using Telnet.
Example:
Com 1 Port
Communications parameters:
Baud
9600
Bits
8
Parity
None
Stop Bits
1
Login name:
target
Password:
password