Grass Valley Kayak HD Installation v.6.8.8 User Manual
Page 150

150
Kayak HD — Installation and Service Manual
Section 4 — Maintenance
Figure 104. Netcheck Screen
2.
The IP range can be changed if required. Click on the
Scan
button to
display all network components in the IP address pane of the Netcheck
window.
3.
In the
Ping
section of the Netcheck window, click to select the checkbox
for either
•
selected hosts
•
all hosts
The default Ping Delay is 1000 ms and the default Packet Size is 32
bytes. You can change this setting if required.
4.
Click on the
Start Pinging
button and the listing for the pings displays in
the upper part of the Netcheck window. (The
Start Pinging
button toggles
to
Stop Pinging
.)
5.
When the required ping information has been obtained, click the
Stop
Pinging
button. Grass Valley recommends that you test your connection
using a minimum of 1000 pings to check for problems.
Note
The packet loss should not be higher than 0.1%. If the packet loss is higher
check your network. Possible reasons for network errors are unscreened
cables, problems with switches and hubs, or a network segment with exces-
sive traffic.
KHD_NetCheckWi
n
dow