Grass Valley Kayak HD Installation v.6.8.8 - Manual (Page 155)

Kayak HD — Installation and Service Manual 155
Troubleshooting and Diagnostics
Local Panel Test Mode 5 (Color Test):
1. Simultaneously press the buttons:
Black Preset + Trans Preview + Key4
2. In this mode select a key group on the Effects Subpanel, and then use
the buttons
Key 1- Key4 to select the different display colors.
Most groups have only white LEDs, but the four bus rows use both
white and red and the number block uses all four colors.
Press the following transition buttons to change the brightness:
Key1 = White
Key2 = Red
Key3 = Green
Key4 = Blue
DVE Dark in large steps
ADD Dark in small steps
Mix Bright in small steps
Wipe Bright in large steps