Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 73)

August 15, 2006 K2 Media Client User Manual 73
Editing a clip
NOTE: Using the preview feature, you can play and add cue points to a clip while
it is still being recorded. (
See “Previewing a clip that is recording” on page 137 .)
Removing a cue point
1. In Cue view, select a cue point in the list.
2. Do one of the following:
• Click the Remove button, or
• Select Player | Remove .
Jump to the selected cue point
Use the following steps to jump to the selected cue point.
1. In Cue view, select a cue point in the list.
• Click the Goto button, then select Selection .
2. Press the Play button on the onscreen transport controls
Playout starts from the cued frame.
Jump to the next cue point
Use the following steps to jump to the next cue point. Depending on the current play
position, the clip will cue to the next cue point in the clip.
1. In Cue view, click the Goto button, then select Next Cue .
2. Press the Play button on the onscreen transport controls.
Playout starts from the cued frame.
Renaming a cue point
1. In Cue view, select a cue point in the list.
2. Select Player | Rename.
3. Use the text entry dialog to enter a new cue name, then click OK or press Enter .
Editing a clip
Topics in this section are as follows:
• “Moving clip mark-in/mark-out points” on page 74
• “Clearing mark-in/mark-out points” on page 75
• “Adjusting clip audio level” on page 76
• “Changing the clip thumbnail image” on page 76
• “Striping timecode (replacing the timecode track)” on page 77
• “Renaming a clip in the Player application” on page 77