Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 55)

August 15, 2006 K2 Media Client User Manual 55
To record a clip
To record a clip
This section covers:
• “Using New Clip record mode” on page 55
• “Using Crash record mode” on page 55
• “Using Fixed Length record mode” on page 55
• “Specify clip length after recording has begun” on page 56
• “Using continuous record” on page 56
Using New Clip record mode
To create and name a clip before recording starts:
1. Verify video, audio, widescreen, and other settings for your recording as explained
in “Before you record: Recorder settings checklist” on page 54 .
2. Select New Clip to create and load a clip.
3. To rename the clip, select the default clip name , then enter a new clip
name.
4. Select the record button on the onscreen transport controls .
The recording progresses until you select Stop .
Using Crash record mode
Crash record occurs when you start a recording without specifying a clip name. The
clip is given a default name, then the recording continues until you select stop.
To crash record:
1. Verify video, audio, and other settings for your recording as explained in “Before
you record: Recorder settings checklist” on page 54 .
2. Select the record button on the onscreen transport controls .
The recording progresses until you select Stop .
Using Fixed Length record mode
You can specify the clip length before recording, or during recording. Fixed length
recording continues until the clip length is reached or until you select stop.
1. Verify video, audio, and other settings for your recording as explained in “Before
you record: Recorder settings checklist” on page 54 .
2. Select Length in the Recorder pane.
The Length dialog box appears.