RLE LD2100 V.2.6 - Manual (Page 91)

rletech.com LD2100 User Guide 91
A
P P E N D I X
C HAPTER 0
T
ECHNICAL
S
PECIFICATIONS
Table B.1 Technical Specifications
Power 24VAC isolated @ 600mA max, 50/60Hz; requires power
supply (not included)
24VDC@ 600mA max; requires power supply:
PSWA-DC-24 (not included)
Inputs
Water Leak Detection Cable Compatible with SeaHawk sensing cable (not included)
Cable Input LC-KIT: 15ft (4.57m) leader cable and EOL (included)
Recommended Maximum Length 5,000ft (609m)
Detection Accuracy ± 2ft (0.6m)+/- 0.5% of the cable length
Detection Repeatability ± 2ft (0.6m) +/- 0.25% of the cable length
Detection Response Time 5-995sec, software adjustable in 5sec increments; ±2sec
Outputs
Relay 1 Form C summary relay; 1A @ 24VDC, 0.5A resistive @
120VAC; configurable for latched or non-latched
Communications Ports
Ethernet 10/100 BaseT, RJ45 connector; 500VAC RMS isolation
EIA-232 DB9 female connector; 9600 baud; No parity, 8 data bits, 1 stop
bit
EIA-485 9600, 19200, 38400, or 56700 baud (selectable); Parity: none,
even or odd, 8 data bits, 1 stop bit
Protocols
TCP/IP, HTML, TFTP IPv4.0; webpages comply with Rehabilitation Act of 1973,
sections 504 and 508, US Dept of Education (website
accessibility for computer users with disabilities)
SNMP V1: V2C MIB-2 compliant; NMS Manageable with Get, Set,
Traps