RLE LD2100 V.2.6 - Manual (Page 13)

rletech.com LD2100 User Guide 13
C
H A P T E R
C HAPTER 1
I
NSTALLATION
Installing the LD2100 involves mounting it to a wall in the appropriate location and making
the necessary connections for power, leak detection, and communications.
2.1. Prepare for Installation
Before installing the LD2100, have the following supplies available:
Included with the LD2100
♦ Wall mount kit (or purchase optional enclosure, LD-ENC)
♦ Cross-over cable (blue with yellow ends)
♦ 15ft. (4.57m) leader cable
♦ End-of-line terminator (EOL)
Available from RLE, Sold Separately
♦ SeaHawk sensing cable
♦ Non-sensing cable, other accessories
♦ 24VAC power supply (part #WA-AC-24-ST) or 24VDC power supply (part
#PSWA-DC-24)
Information Required
Consult with your IT administrator to determine the following network settings for the
LD2100:
♦ IP address
♦ Subnet mask
♦ Default gateway