RLE LD2100 V.2.6 - Manual (Page 38)

38 LD2100 User Guide 800.518.1519
3 Web Interface
3.3.7.1 Working with a Reference Map
The LD2100 allows users to upload up to 2 maps of their facilities - one of which can be
populated with interactive leak detection data. This provides users with a real-time view of
their facility, including the physical location and status of their leak detection equipment, and
a visual indication of any active alarms.
Through the mapping process, the LD2100 creates an overlay for an uploaded map image. It
superimposes the locations of your equipment - based on coordinates you designate - over the
top of your map image. This overlay is created through the links at the bottom of the Web/Map
Settings page. Once uploaded and populated, the map is accessible through the buttons
generated on the right side of the LD2100 home page.
Web Refresh Rate Decide how often the web page refreshes - checks for new data
and reloads the web page - when left in an open web browser.
Enter a value from 10 to 999 seconds. If you enter 0, the screen will
not refresh on its own - you’ll have to click the refresh button on
your web browser or press F5 to refresh the screen.
Default setting: 10 seconds
Main Page Image One image appears on the right side of the home page. Images are
uploaded through the Map page of the web interface. Select an
image from the drop down list of uploaded images.
Default setting: Seahawk
Main Page/Zone 1
Link Text
Users can designate links to appear on the LD2100’s home page.
Links will appear on the lower left side of the screen, below the
tables of information.
Additional links can be configured through the Zone Link/URL
Settings configuration link.
Enter the text for the first link here.
Main Page/Zone 1
Link URL
This is the URL that the link on the home page will connect to.
Enter the appropriate URL here.
Floor Map #1 Link
Text
Links to two floor maps can be displayed on the LD2100’s home
page. These links display under the image on the right side of the
screen. The maps themselves are loaded on the
Configuration>System/Flash Management Screen.
Enter the text for the link to the first map here.
Floor Map #2 Link
Text
Enter the text for the link to the second map here.
Floor Map #1
Interactive
While the LD2100 can display two maps, only one of the maps can
be interactive. If you’d like Map #1 to be interactive, designate that
here.
Option Description
Table 3.7 Web/Map Configuration Options