RLE LD2100 V.2.6 - Manual (Page 48)

48 LD2100 User Guide 800.518.1519
3 Web Interface
Max Inform Retries The number of times the LD2100 will attempt to resend an
undelivered trap. Enter a number 0 - 999. Enter 0 for an unlimited
number of attempts.
Default = 0 (unlimited)
Inform Interval The number of minutes that passes between inform operations.
Enter a number of minutes, 1 - 999.
Default = 1
V1/V2C Community Names
Get/Read Default setting: public
Set/Write Default setting: public
Trap Default setting: public
Trap Communities Identifies devices that receive SNMP Traps and/or Syslog messages
from the LD2100 and interact with the LD2100 over the network.
1 IP Address To add a device to the Communities list, select a community number
posted as “empty.” Enter the receiving device's IP Address. An IP
Address of 0.0.0.0 in this field allows any device to access the
LD2100 through an MIB browser.
Check the appropriate boxes to designate whether the device will
receive traps and/or Syslog messages.
2 IP Address
3 IP Address
4 IP Address
Send Test Trap -
Leak Detected
Send Test Trap -
Cable Break
Send Test Trap -
Contamination
Use these buttons to send test traps - test your system setup to
ensure all information has been entered correctly.
Option Description
Table 3.11 SNMP/Syslog Menu Options (continued)