RLE LD2100 V.2.6 - Manual (Page 52)

52 LD2100 User Guide 800.518.1519
3 Web Interface
Option Description
BACnet Device
Name
Designate a unique name for the LD2100, up to 30 characters
BACnet Device ID Set the device ID, up to 30 characters. 0 = disabled
BACnet Description Enter a description for the device, up to 30 characters
Bacnet UDP Port Enter a 0 to specify port 47808 (0xBAC0) as the UDP port. If another
port is specified by your application, enter that value here.
Default setting: 0
Bacnet MS/TP Max
Master
Set the slave address, 1-127. 0 = Slave only
Default setting: 0
Register as Foreign
Device at IP
IP address of the master device with which you’re trying to
communicate. Requires a BBMD for foreign device discovery.
Registration Time-
to-Live
Time, in seconds, for foreign device discovery.
Foreign Device
Table #1 & #2
Fixed fields whose content is drawn from the entries in the Register
Foreign Device and Registration T-t-L fields.
Bacnet BBMD-BDT Used by some BACnet masters for discovery on different subnets.
LD5200 IP Address Non-editable, this address is configured through the Network/IP link.
(Primary) #1 IP
Address
Designate the appropriate IP addresses.
#2 IP Address
#3 IP Address
#4 IP Address
Bacnet Alarms Event Notification
Recipient #1 IP
Address
When there is a BACnet alarm, a message will be sent to this
address.
PID If necessary, enter the process identifier.
Notification Type Select unconfirmed or confirmed. If you select confirmed, the
recipient will be required to acknowledge the alarm.
Default setting: Unconfirmed
Notification Class A list of devices to be informed if an event enrollment object
determines that a warning or alarm message needs to be sent.
Priority Designate a priority to controls where conflicting control situations
may occur.
Leak Detected
Alarms
Select analog or binary.
APDU_Timeout Amount of time (milliseconds) between retransmissions of an APDU
requiring acknowledgement for which no acknowledgement has
been received.
Table 3.13 Bacnet Options