beautypg.com

Figure 3.21 lcd-240 configuration – RLE LD2100 V.2.6 User Manual

Page 50

background image

50

LD2100 User Guide

800.518.1519

3

Web Interface

Figure 3.21

LCD-240 Configuration

LCD Options

A small number of companies connect an aftermarket LCD to the

LD2100. This option allows them to configure the text messages that

are pushed to that screen. Two lines of text are available on this

particular screen, containing a maximum of 40 characters each.
After selecting the LCD-240 display option, click the submit changes

button. When the page refreshes there will be eight fields to

configure.

LCD240 Identifier

Enter the name of the LD2100 system.

LCD240 Normal Text The text that displays on the LCD when the system is in a normal

state.

LCD240 Alarm Text

The text that displays on the LCD when the system is in an alarm

state.

LCD240 Leak Text

The text that displays on the LCD when the system detects a leak.

LCD240 Cable Break

Text

The text that displays on the LCD when the system has a cable

break.

LCD240

Contamination Text

The text that displays on the LCD when the system detects a

contamination alarm.

LCD240 Refresh

Interval and Refresh

on Alarms Only

Checkbox

The time interval that passes between screen refreshes.

If you check the Refresh on Alarms only checkbox, the display

refreshes only when an alarm is triggered.

Modbus Slave

Register Display

Log/Statistics

Click these links to display the corresponding data.

Modbus Packet Log

N2 Register Display

Log / Statistics

Option

Description

Table 3.12

EIA-485 Port/Modbus Options