RLE LD2100 V.2.6 - Manual (Page 28)

28 LD2100 User Guide 800.518.1519
3 Web Interface
3.2 Identity
The Identity link displays basic LD2100 information, including model number, system name,
contact information, firmware version, and IP address. Most of these values can be adjusted
through the Configuration screens. This page is intended for reference only, not system
adjustment.
Figure 3.2 Identity Page
Field Description
Alarm Status If the controller is in an alarm state, details regarding the alarm are
noted in this field. The field is color coded to indicate the type of
alarm.
Cable Length The length of cable connected to the controller, as calculated by the
LD2100.
Cable Current The amount of current running on the sensing cable.
Leg 1 Resistance The resistance of Leg 1 is displayed in Ohms.
Leg 2 Resistance The resistance of Leg 2 is displayed in Ohms.
Leak Alarm Delay
Count
The amount of time (in seconds) that passes between the time a
leak is detected and when it is annunciated.
Contamination
Alarm Delay Count
The amount of time (in seconds) that passes between the time a
contamination alarm is detected and when it is annunciated.
Re-alarm
Countdown
The amount of time remaining before an alarm is re-annunciated.
Last Alarm Time The last time an alarm was detected
sysUp Time The amount of time that has passed since the system was last
reset or powered on.
Table 3.1 LD2100 Home Page