NewTek 3Play 4800 - Manual (Page 133)

Page | 117
8.6.5 FAST JOG
The FAST JOG button is a toggle. Press it to turn the feature on, and press it again to disable it.
When enabled, the transport effect of the Jog Wheel (discussed next) is multiplied eight times so
that you can traverse the frames in your media more quickly.
8.6.6 JOG WHEEL
Rotate the Jog Wheel to navigate back and forth through the frames of the current a/v selection.
Tip: Inside Media Browser, you can scroll through the File Pane using the Jog Wheel.
Normally, Jog will stop when you reach the In or Out point for the current clip. To continue to
scan outside these boundaries, hold down SHIFT while jogging.
8.7 PLAY SPEED (T-BAR SECTION)
This group contains just two controls, an illuminated T-
Bar, and a button labeled +/-. Adjustments to T-Bar
position progressively modify playback speed, and can
also automatically engage playback when not already in
progress.
Since, at a given moment, Channel A and B may well be
set to different playback speeds, the T-Bar position may
not initially reflect the correct speed when you change
which channel is delegated.
In this case, the speed applied updates as soon as you
move the T-Bar to (or through) the current speed. (When a newly delegated source is at 0%
speed – whether due to pressing STOP or T-Bar use – the initial T-bar position is ignored when
you push PLAY and playback commences at 100% speed.)
In normal operating mode, the maximum T-Bar position corresponds to 100% playback speed,
with 0% at the opposite extreme of the lever’s travel. Pressing +/- engages a special T-Bar mode
Figure 99