NewTek 3Play 4800 - Manual (Page 101)

Page | 85

Exit – Leave the Replay Desktop and return to the Session screen.
OPTIONS

One Button Marking – Section 8.10.1 discusses methods you will use to mark (define the
in and out points for) CLIP LIST events. The “one button marking” method requires only
that you press the OUT button; an In point is set automatically at a pre-defined earlier
time. This menu items lets you choose the offset used for the automatic In point.

Still Image Duration – Choose the default duration applied to still images added to the
CLIP or PLAY LIST.

Out Point Padding – This menu item optionally allows play to continue past the actual
Out point for CLIP LIST events from a minimum period of five seconds to ‘infinite’ (i.e.,
until the recorded file ends or you press STOP).

CLIP LIST Previews – This option (not available in 3Play Mini) toggles the display of Clip
Monitors in the area below the CLIPS LIST tabs. Small previews show all recorded angles
for the currently active CLIP LIST event row.

Failsafe Camera Configuration – If you have enabled A/V Passthrough (See Section
7.1.3) you can use this menu item to access setup controls for (video) Input 8 when the
session is in Redundant (4 Channel Mode).

Tally from TriCaster – When a downstream TriCaster is receiving 3Play’s network output
via one of its own Network Inputs, enable this option to shown red and green on-air
tally borders around 3Play viewports (requires TriCaster Advanced Edition).

Single Pane View – This powerful option can have a dramatic impact on your replay
workflow:
o Enable Single Pane View to collapse the CLIPS LIST and PLAY LIST panes into one
‘super’ module showing CLIPS LIST tabs at left, and PLAY LIST tabs at right.
o Drag selected content from PLAY LIST panes onto other PLAY LIST or CLIP LOST
tabs to copy items to the target list.